Trimethylsilyl 2-methylpropanoate
TRIMETHYLSILYL ISOBUTYRATE
CAS: 16883-61-7
Molecular Formula: C7H16O2Si
Trimethylsilyl 2-methylpropanoate - Names and Identifiers
| Name | TRIMETHYLSILYL ISOBUTYRATE |
| Synonyms | TRIMETHYLSILYL ISOBUTYRATE Trimethylsilyl 2-methylpropanoate triMethylsilyl 2-Methylpropanoate Isobutyric acid, trimethylsilyl ester Propanoic acid, 2-methyl-, trimethylsilyl ester propanoic acid, 2-methyl-, trimethylsilyl ester |
| CAS | 16883-61-7 |
| InChI | InChI=1/C7H16O2Si/c1-6(2)7(8)9-10(3,4)5/h6H,1-5H3 |
Trimethylsilyl 2-methylpropanoate - Physico-chemical Properties
| Molecular Formula | C7H16O2Si |
| Molar Mass | 160.29 |
| Density | 0.8501 g/cm3 |
| Boling Point | 132 °C |
| Flash Point | 29.2°C |
| Vapor Presure | 8.16mmHg at 25°C |
| Storage Condition | 0-6°C |
| Refractive Index | 1.404 |
| Physical and Chemical Properties | Storage Conditions: 0-6 ℃ |
Trimethylsilyl 2-methylpropanoate - Risk and Safety
| Safety Description | 24/25 - Avoid contact with skin and eyes. |
Trimethylsilyl 2-methylpropanoate - Introduction
TRIMETHYLSILYL ISOBUTYRATE is an organosilicon compound commonly expressed as ((CH3)3SiO)2O.
In terms of properties, TRIMETHYLSILYL ISOBUTYRATE is a colorless and transparent liquid with low viscosity and low surface tension. It is difficult to dissolve in water but soluble in organic solvents. It has heat resistance, chemical resistance, electrical insulation and excellent waterproof and moisture resistance.
In industry, TRIMETHYLSILYL ISOBUTYRATE is mainly used as a lubricant, anti-sticking agent and falling film agent. It can be used for the modification of paints, coatings, rubber, plastics and other materials to improve their weather resistance and aging resistance. In addition, TRIMETHYLSILYL ISOBUTYRATE can also be used as a packaging material for electronic components, cable lubricants, high temperature lubricants, etc.
in terms of preparation method, the preparation of TRIMETHYLSILYL ISOBUTYRATE is generally obtained by reacting isobutyric acid with trimethylchlorosilane. The specific steps are: adding isobutyric acid into trimethylchlorosilane, catalyzing the reaction by an acid catalyst, reacting at a suitable temperature for a period of time, and finally purifying by distillation to obtain the target product.
In terms of safety information, TRIMETHYLSILYL ISOBUTYRATE is generally considered to be a harmless compound to the human body. However, as a chemical substance, it is still necessary to pay attention to the following safety matters: avoid inhaling solvent vapor, contact with skin, and wear protective gloves, glasses and breathing apparatus when using. If inadvertent contact or inhalation, should immediately wash or medical treatment. In addition, the storage should avoid fire and high temperature, stored in a cool, ventilated, dry place.
In terms of properties, TRIMETHYLSILYL ISOBUTYRATE is a colorless and transparent liquid with low viscosity and low surface tension. It is difficult to dissolve in water but soluble in organic solvents. It has heat resistance, chemical resistance, electrical insulation and excellent waterproof and moisture resistance.
In industry, TRIMETHYLSILYL ISOBUTYRATE is mainly used as a lubricant, anti-sticking agent and falling film agent. It can be used for the modification of paints, coatings, rubber, plastics and other materials to improve their weather resistance and aging resistance. In addition, TRIMETHYLSILYL ISOBUTYRATE can also be used as a packaging material for electronic components, cable lubricants, high temperature lubricants, etc.
in terms of preparation method, the preparation of TRIMETHYLSILYL ISOBUTYRATE is generally obtained by reacting isobutyric acid with trimethylchlorosilane. The specific steps are: adding isobutyric acid into trimethylchlorosilane, catalyzing the reaction by an acid catalyst, reacting at a suitable temperature for a period of time, and finally purifying by distillation to obtain the target product.
In terms of safety information, TRIMETHYLSILYL ISOBUTYRATE is generally considered to be a harmless compound to the human body. However, as a chemical substance, it is still necessary to pay attention to the following safety matters: avoid inhaling solvent vapor, contact with skin, and wear protective gloves, glasses and breathing apparatus when using. If inadvertent contact or inhalation, should immediately wash or medical treatment. In addition, the storage should avoid fire and high temperature, stored in a cool, ventilated, dry place.
Last Update：2024-04-10 22:30:50
